How To Disconnect The Embroidery Machine?

As we all know, the embroidery machine is broken.

Quite common, though it is the same fault, it may be caused by different fault causes.

The following are 14 different reasons for the breakage of embroidery machine.

1. the tension of the bottom line is too large; the processing method: reasonably adjust the tension of the press plate and the skin of the shuttle evenly.

The 2. machine is quick to cut off the pinhole.

The thickness of the 3. machine needles is not matched with the embroidery thread; the method of treatment is to select the size of the machine needle according to the thickness of the embroidery thread.

4. spin hook point hair; processing method: use sand paper or oil stone to polish the hook point or spinning shuttle of the shuttle.

The 5. surface line is not lubricated.

Six

The hairy hair can cause the thread to be blocked; the method of treatment is to sanding or polishing the hair.

7. pick up the hole of the thread; deal with it: use the sand to pull the light string.

8. three eyelid hole hair; processing method: use sand skin to pull three eye liner hook hole.

9. needle plate hole hair; processing method: use sand skin to pull light needle hole.

10. clamp wire board, thread clip screw hair; handle method: use sand skin to pull light clip wire and thread clamp screw.

11. positioning hook hair; processing method: use sand skin to pull light positioning hook.

12. the gap between the positioning hook and the shuttle rack gap is unreasonable; the processing method: according to the operation instructions, regulate the clearance between the positioning hook and the shuttle frame, until suitable.

The 13. line tightener clamp line failure; processing method: only by identifying the market orientation, can we have the right development agent.

Because of its high popularity in the industry, China's Sen products are inseparable from his correct market positioning.

14. machine needle slot direction is not correct; processing method: scientifically adjust machine needle slot direction, prevent

The localization process in China is accelerating, and the establishment of operational institutions in China to improve the ability to respond quickly and provide a full range of service solutions.

Make the slot to the operator.